There are major differences when using a 100 ton crane vs a 5 ton crane. Of course, crane safety is important in all regards. You’re getting ready to lift some heavy loads, and it’s important to know all the precautions that should be taken. This includes before, during and after lifting anything with a 100 ton crane(grúa de 100 toneladas).
The first thing that should be done is a visual inspection. Of course, if you don’t know what to look for, then you’re not going to be able to do this inspection properly. You’re going to want to make sure you use a checklist if you’re not familiar. And to be quite frank, you need to be familiar with an overhead crane prior to performing an inspection.
You also need to be paying attention to any site conditions. These cranes take up a lot of space, and your surroundings matter, in more ways than one. Identify any potential hazards(peligros potenciales) so that you can remedy the situations before you start lifting loads with the crane. Again, it helps if you are familiar with how this type of crane operates.
You also need to be paying close attention to the stability zone. The machine needs to be able to handle the load properly. This goes for both the equipment and the zone in which it operates. Naturally, it matters when it comes to the stabilizers being deployed, completely.
You’re also going to want to pay close attention to the rigging. The rigging is important when it comes to crane safety(seguridad de la grúa), as you can well imagine. What about those safety devices? Are you familiar with them? You need to know what they are, make sure they are in place and you need to know how to use them.
Be sure that people are a safe distance away from the crane when you are getting ready to put it in operation. This goes not only for the equipment, but the loads and the loading zone. This next tips goes without saying, but it’s always important to double check and think twice before lifting a heavy load.
You want to be sure that the crane is operating within its capacity. You will want to be sure that you don’t even get close to going over capacity in fact. Doing so can risk the operation and more importantly the lives of people in the area.
You also want the load to be positioned properly when it is lifted. It of course needs to be close to the crane, as close as possible. The next safety tip deals with the actual lifting of the load. You want the load to stay as close to the ground as possible while it is being moved.
How close to the ground you keep a load has much to do with what you’re doing. As you can see, there are quite a few safety tips when it comes to operating a 100 ton crane correctly. You are going to really need to make crane safety a priority because moving heavy loads(mover cargas pesadas) like this comes with great responsibility.